Besides its improved fuel curves, efforts from Malossi’s technical staff resulted with a rev limiter increase of 2,250 RPM depending on the vehicle, making Force Master an even higher performing ECU! Force Master allows to change the injection in order to fit perfectly the Malossi 4-stroke and original cylinders. Carburation adjusting ± 20% at min/medium/max RPM limiter : + 2,250 RPM Original 9.250 - Malossi 11.500 4 different maps : curve 0 : original exhaust system, cylinder with kit Malossi ø 63 mm 125 cc., original head, original camshaft and original filter curve 1 : Malossi exhaust…

MHR Team II ignition is a great innovation!!! Manages multiple maps simultaneously without having to resort to a hand-held device, with just a simple click. Ability to shift the selected map by moving the OFFSET (± 2°). The inner rotor ignition systems designed by Malossi are based on the state-of-the-art technology applied to racing. Such a new system resulted from the need to overcome the technical limitations imposed by conventional flywheel ignition, which cannot ensure consistent performance over 10,000 rpm and causes severe setting-up problems for racing vehicles. We made the control…

Technical features: Resistor spark plug cap High-quality resistor spark plug cap, which ensures constant resistance with minimal variations in overload conditions. External body made with a robust rubber structure featured by excellent resistance to intense heat and mechanical stress. Special rubber rings positioned internally and at the ends allowing to avoid external discharge even in conditions of high humidity. Spark plug cable Silicone spark plug cable Ø7 mm with double insulation (EPDM inside and silicone outside). Wide temperature range from -40° to +220°. Flexible and resistant.

With an all-new look, the Force Master 2.1 control unit is much easier to configure. Making products more ergonomic and easy to use has always been a Malossi goal: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication lines, a new user interface and the addition of a capacitive ignition input, Force Master 2.1 is the ideal complement for vehicle performance management: without functional limitations, it allows the engine to be pushed beyond the barrier of the original rev limiter. Technical details Carburation adjusting ±…

Wenn Sie hohe Drehzahlen lieben und auf der Suche nach einer höheren Maximalleistung sind, ist dieses Schwungrad für Innenzündung genau das Richtige für Sie. Es ist sogar noch leichter als das 296 g schwere Modell (Art.-Nr. 5511551B ) und wiegt nur 201 g, was ein schnelleres Ansprechen bei Drehzahländerungen ermöglicht.

With an all-new look, the Force Master 2.1 control unit is much easier to configure. Making products more ergonomic and easy to use has always been a Malossi goal: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication lines, a new user interface and the addition of a capacitive ignition input, Force Master 2.1 is the ideal complement for vehicle performance management: without functional limitations, it allows the engine to be pushed beyond the barrier of the original rev limiter. Technical details Carburation adjusting ±…

STROBE CONTROLLER The perfect accessory for our new MHR TEAM II Malossi inner rotor ignitions. This compact tool not only allows the advance to be checked with disarming ease, thanks to a 200 lm light with a duration of 10 µs and extremely reduced delay (<1µs), it also completely replaces classic strobe guns thanks to its technical characteristics, decidedly superior to many guns currently available on the market. To activate the controller, the cables simply need to be connected to the battery and ignition coil. Once map 0 has been set in the MHR TEAM II Malossi , inner rotor ignitions,…

VESPower Ignitions Range of complete ignitions for vintage gear Vespa. In order to allow an easy and perfect installation, a specific version for each model has been studied. The new ignition range features: Lightened flywheel (weight 1,2 kg) with moment of inertia equal to 28 Kg/cm² (see attached chart). It is made from forged with external set up for additional masses (not included into the kit). 12 V (90 Watt ) 4-pole stator with output for battery charging. Red colored plastic fan with advanced booster cooling secondary fins (optimized fan profile and distribution absorption). Wiring…

4-poliger Stator 12 Volt (90 Watt). ES ist erforderlich, sämtliche Original-Lampen auszutauschen!

Die Verwendung des neuen O 2 Controllers ermöglicht die Steuerung der Vergasung in dem Bereich, in dem die Lambda-Sonde die Art des in den Brennraum einzuführenden Luft-Benzin- Gemisches steuert. Dieses Gerät ist in der Lage, die Lambdasonde bei einem vom stöchiometrischen Wert abweichenden Wert arbeiten zu lassen und das A/F (Luft / Kraftstoff-Verhältnis) anzureichern, um Drehmoment und Leistung zu verbessern und gleichzeitig die DNA des Motors zu respektieren. Das Hauptziel der Forschungs- und Entwicklungsabteilung von Malossi besteht darin, sicherzustellen, dass jedes Fahrzeug über eine…

With an all-new look, the Force Master 2.1 control unit is much easier to configure. Making products more ergonomic and easy to use has always been a Malossi goal: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication lines, a new user interface and the addition of a capacitive ignition input, Force Master 2.1 is the ideal complement for vehicle performance management: without functional limitations, it allows the engine to be pushed beyond the barrier of the original rev limiter. Technical details Carburation adjusting ±…