Half-pulley made of aluminium alloy with silicon content, machined on very high precision CNC machines and diamond-finished, with recalculated profiling of the roller sliding guides.

TORQUE DRIVER The mobile driven split pulley comes from our racing department's many years of experience, and is manufactured with the best possible special nitrided steels in order to ensure a long life. This component called Torque Driver for its specific function of determining the exact shifting moment, was calculated to give the vehicle the maximum possible acceleration in connection with the specific power of any single engine. The spiral's peculiar shape was studied to fix the RPMs on the point of maximum power. It was expressly created to complete the development of boosted motors…

TORQUE DRIVER The mobile driven split pulley comes from our racing department's many years of experience, and is manufactured with the best possible special nitrided steels in order to ensure a long life. This component called Torque Driver for its specific function of determining the exact shifting moment, was calculated to give the vehicle the maximum possible acceleration in connection with the specific power of any single engine. The spiral's peculiar shape was studied to fix the RPMs on the point of maximum power. It was expressly created to complete the development of boosted motors…

A half pulley with integrated geared teeth on the external diameter designed to engage with an electric start motor. Completely interchangeable with the original pulley and adaptable to both MALOSSI MULTIVAR and original variator. Pulley with gear made of carbon steel and surface hardened dark for durability. Technical features: Material: carbon Steel External Diameter: 118 mm Heat Treated to a surface hardness of HRC 40-50 Dark surface finish Pulley Angle 14° Internal spline teeth: 18

Half-pulley made of aluminium alloy with silicon content, machined on very high precision CNC machines and diamond-finished, with recalculated profiling of the roller sliding guides.

Malossi Super T Max quickens its steps. Mhr Power Transmission, art. 6714757, is a Malossi project: HTQ Z 26/40 pinion and ring gear pair with lengthened gear ratio, Malossi Morse lightened, narrower, frictionless racing chain. This system completely replaces the original primary gears (25-tooth pinion and 41-tooth ring gear) with a 26-tooth drive pinion and a 40-tooth driven ring gear, thus providing a 7% longer ratio. Besides providing this longer ratio, these gears are narrower, as to fit the new Malossi Morse racing chain, which is frictionless and without friction springs, thus lighter,…

Torque Driver Malossi Aluminium Rear Pulley System MHR Aluminum, now in aluminium for lightness and strength increase. The pulley is riveted to the hubs for maximum strength and to reduce the tolerance between the hub and the bushing. The surface roughness is just Ra 0.4.

VENTILVAR 2000 It’s a fixed half-pulley with a diamond finish of the belt-side pulley surface and a redesigned working angle to further increase the gearing range. This component completes the Multivar and renders it unparalleled. Specially designed for the line of variable-speed drives for scooters, it further improves the performance of the drive belt. It is not just a simple accessory, but a very important part for guaranteeing the long life of all the transmission components. The temperatures produced inside the crankcases where variators work with V-belts are prohibitive at critical…

VENTILVAR 2000 It’s a fixed half-pulley with a diamond finish of the belt-side pulley surface and a redesigned working angle to further increase the gearing range. This component completes the Multivar and renders it unparalleled. Specially designed for the line of variable-speed drives for scooters, it further improves the performance of the drive belt. It is not just a simple accessory, but a very important part for guaranteeing the long life of all the transmission components. The temperatures produced inside the crankcases where variators work with V-belts are prohibitive at critical…

K-DRIVE MALOSSI Malossi K-DRIVE is a lighter gear ratio than the original for the Yamaha Tmax 530 - 560 . Characterised by a sought-after appearance, the K-DRIVE crowns and pinions have different ratios to satisfy all the rider’s requirements. Pinion 6117912B Z 24 6118805B Z 25 6117913B Z 27 6118804B Z 27 6117914B Z 28 6118814 Z 28 6117915B Z 29 6118815 Z 29 Crown 6117916B Z 56 6117917B Z 57 6117918B Z 58 6118806B Z 60 TECHNICAL SPECIFICATIONS The crowns are made from aluminium subjected to hard oxidisation and are coloured black. With this treatment. Malossi has maintained a particularly…