K-DRIVE MALOSSI Malossi K-DRIVE is a lighter gear ratio than the original for the Yamaha Tmax 530 . Characterised by a sought-after appearance, the K-DRIVE crowns and pinions have different ratios to satisfy all the rider’s requirements. Pinion 6117912B Z 24 6117913B Z 27 6117914B Z 28 6117915B Z 29 Crown 6117916B Z 56 6117917B Z 57 6117918B Z 58 6118806B Z 60 TECHNICAL SPECIFICATIONS The pinions are made from aluminium with hard oxidisation 25 microns deep. With this treatment Malossi has maintained a particularly light shape of the piece whilst guaranteeing high wear resistance. The central…

TORQUE DRIVER The mobile driven split pulley comes from our racing department's many years of experience, and is manufactured with the best possible special nitrided steels in order to ensure a long life. This component called Torque Driver for its specific function of determining the exact shifting moment, was calculated to give the vehicle the maximum possible acceleration in connection with the specific power of any single engine. The spiral's peculiar shape was studied to fix the RPMs on the point of maximum power. It was expressly created to complete the development of boosted motors…

Kit Over Range MHR Aluminum Malossi: High Performance Scooter Transmission The transmission is one of the key components in a scooter . The kit Malossi MHR Aluminum Over Range is designed to improve efficiency and engine power, ensuring longevity and tuning flexibility. The centrepiece of the new kit Malossi variator transmission remains the Multivar , in constant evolution, which isaccompanied by two sets of rollers to adjust the operation of the transmission according to your needs. With the wide range of variator rollers available in our catalogue, the set-ups are virtually endless. The…

"OVER RANGE" Malossi transmission system This new transmission system takes full advantage of the Malossi components already on sale last year, by adding several new parts that make the entire system particularly suited to the enormous power available. This latest system hinges on the new Fixed Pulley of the torque driver that has a larger diameter and the very latest specifications. The larger diameter of this pulley allows one to have a greater velocity-ratio range compared to the original pulley that has a notably smaller external diameter. Malossi engineers have also taken particular care…

VENTILVAR 2000 It’s a fixed half-pulley with a diamond finish of the belt-side pulley surface and a redesigned working angle to further increase the gearing range. This component completes the Multivar and renders it unparalleled. Specially designed for the line of variable-speed drives for scooters, it further improves the performance of the drive belt. It is not just a simple accessory, but a very important part for guaranteeing the long life of all the transmission components. The temperatures produced inside the crankcases where variators work with V-belts are prohibitive at critical…

Half-pulley made of aluminium alloy with silicon content, machined on very high precision CNC machines and diamond-finished, with recalculated profiling of the roller sliding guides.

TORQUE DRIVER MHR ALUMINUM The Torque Driver is made of aluminium, a material with exceptional heat dissipation, and was subjected to a micro perforation process to increase transmission belt grip and to keep it clean and efficient, expelling from the holes any heat created contaminants.

"OVER RANGE" Malossi transmission system This new transmission system takes full advantage of the Malossi components already on sale last year, by adding several new parts that make the entire system particularly suited to the enormous power available. This latest system hinges on the new Fixed Pulley of the torque driver that has a larger diameter and the very latest specifications. The larger diameter of this pulley allows one to have a greater velocity-ratio range compared to the original pulley that has a notably smaller external diameter. Malossi engineers have also taken particular care…

TORQUE DRIVER The mobile driven split pulley comes from our racing department's many years of experience, and is manufactured with the best possible special nitrided steels in order to ensure a long life. This component called Torque Driver for its specific function of determining the exact shifting moment, was calculated to give the vehicle the maximum possible acceleration in connection with the specific power of any single engine. The spiral's peculiar shape was studied to fix the RPMs on the point of maximum power. It was expressly created to complete the development of boosted motors…

Half-pulley made of aluminium alloy with silicon content, machined on very high precision CNC machines and diamond-finished, with recalculated profiling of the roller sliding guides.

VENTILVAR 2000 It’s a fixed half-pulley with a diamond finish of the belt-side pulley surface and a redesigned working angle to further increase the gearing range. This component completes the Multivar and renders it unparalleled. Specially designed for the line of variable-speed drives for scooters, it further improves the performance of the drive belt. It is not just a simple accessory, but a very important part for guaranteeing the long life of all the transmission components. The temperatures produced inside the crankcases where variators work with V-belts are prohibitive at critical…