MHR Team II ignition is a great innovation!!! Manages multiple maps simultaneously without having to resort to a hand-held device, with just a simple click. Ability to shift the selected map by moving the OFFSET (± 2°). The inner rotor ignition systems designed by Malossi are based on the state-of-the-art technology applied to racing. Such a new system resulted from the need to overcome the technical limitations imposed by conventional flywheel ignition, which cannot ensure consistent performance over 10,000 rpm and causes severe setting-up problems for racing vehicles. We made the control…
Kaufen Sie außerhalb der EU ein?
Klicken Sie hier für Infos!
Fachpersonal
Klicken Sie hier und schreiben Sie uns!
Infos per WhatsApp an!
Klicken Sie hier
Einen günstigeren Preis gefunden?
Schreib uns HIER
Viele sichere Zahlungsmethoden, Kreditkarten oder PayPal
Manages multiple maps simultaneously without having to resort to a hand-held device, with just a simple click. Ability to shift the selected map by moving the OFFSET (± 2°).
The inner rotor ignition systems designed by Malossi are based on the state-of-the-art technology applied to racing. Such a new system resulted from the need to overcome the technical limitations imposed by conventional flywheel ignition, which cannot ensure consistent performance over 10,000 rpm and causes severe setting-up problems for racing vehicles.
We made the control unit even more immune to interferences developing an uP STM8 - 8 bit microprocessor with processing speed of 20 MIPS: guaranteeing spark timing with greater accuracy than prior versions!
The MHR Team II includes a not adjustable with 3 trimmers control unit with variable spark advance timing:
It also features 8 preset maps described as follows:
Other essential components have also been revised, such as the high voltage coil, now able to deliver a maximum discharge voltage >40 KV for normal engine speeds from >3000 RPM and an extraordinary ramp up time @10bar> 1750 V/uS.
One of the most important novelties is the new rotor/stator unit, featuring a completely redesigned static component in terms of mechanics and electronics!
The installation instructions graphically illustrate the best spark advance setup for different engines.
Electrical performance improved by 20%. Minimum start-up speed reduced from 450 rpm to 370 rpm.
The effects of this latest evolution translate into increased voltage supplied to the spark plug, at the same speed, which is anything but negligible compared to the previous model.
TECHNICAL FEATURES
CDI
Control unit with variable spark advance timing and with 3 trimmers:
8 preset maps:
High voltage coil
Rotor-stator unit
WARNING: with this kind of ignition the lighting set is disconnected.
Produkte, die ausschließlich für Wettkämpfe an den dafür vorgesehenen Orten gemäß den Bestimmungen der zuständigen Sportbehörden bestimmt sind. Wir übernehmen keine Haftung für unsachgemäße Verwendung.
Technische Daten
Technical features: High-quality resistor spark plug cap, which ensures constant resistance with minimal variations in overload conditions. External body made with a robust rubber structure featured by excellent resistance to intense heat and mechanical stress. Special rubber rings positioned internally and at the ends allowing to avoid external discharge even in conditions of high humidity.
The inner rotor ignition systems designed by Malossi are based on the state-of-the-art technology applied to racing. Such a new system resulted from the need to overcome the technical limitations imposed by conventional flywheel ignition, which cannot ensure consistent performance over 10,000 rpm and causes severe setting-up problems for racing vehicles. We made the control unit even more immune to interferences developing an uP STM8 - 8 bit microprocessor with processing speed of 20MIPS, guaranteeing spark timing with greater accuracy than prior versions! The MHR version includes a control…
Technical features: Resistor spark plug cap High-quality resistor spark plug cap, which ensures constant resistance with minimal variations in overload conditions. External body made with a robust rubber structure featured by excellent resistance to intense heat and mechanical stress. Special rubber rings positioned internally and at the ends allowing to avoid external discharge even in conditions of high humidity. Spark plug cable Silicone spark plug cable Ø7 mm with double insulation (EPDM inside and silicone outside). Wide temperature range from -40° to +220°. Flexible and resistant.
Die Verwendung des neuen O 2 Controllers ermöglicht die Steuerung der Vergasung in dem Bereich, in dem die Lambda-Sonde die Art des in den Brennraum einzuführenden Luft-Benzin- Gemisches steuert. Dieses Gerät ist in der Lage, die Lambdasonde bei einem vom stöchiometrischen Wert abweichenden Wert arbeiten zu lassen und das A/F (Luft / Kraftstoff-Verhältnis) anzureichern, um Drehmoment und Leistung zu verbessern und gleichzeitig die DNA des Motors zu respektieren. Das Hauptziel der Forschungs- und Entwicklungsabteilung von Malossi besteht darin, sicherzustellen, dass jedes Fahrzeug über eine…
Besides its improved fuel curves, efforts from Malossi’s technical staff resulted with a rev limiter increase of 1,000 RPM depending on the vehicle, making Force Master an even higher performing ECU! Force Master allows to change the injection in order to fit perfectly the Malossi 4-stroke and original cylinders. Carburation adjusting ± 20% at min/medium/max RPM limiter : + 1000 RPM Original 9.000 - Malossi 10.000 (*) 4 different maps : curve 0 : original exhaust system, original cylinder, original head, original camshaft and original filter curve 1 : Malossi exhaust system with db killer,…
Besides its improved fuel curves, efforts from Malossi’s technical staff resulted with a rev limiter increase of 1300 RPM depending on the vehicle, making Force Master an even higher performing ECU! Force Master allows to change the injection in order to fit perfectly the Malossi 4-stroke and original cylinders. Carburation adjusting ± 6% at min/medium/max RPM limiter : + 1300 RPM Original 9.200 - Malossi 10.500 (*) 3 different maps : curve 1 : original exhaust system, original cylinder, Malossi manifold, original head, original camshaft and original filter curve 2 : original exhaust system,…
MHR Team II ignition is a great innovation!!! Manages multiple maps simultaneously without having to resort to a hand-held device, with just a simple click. Ability to shift the selected map by moving the OFFSET (± 2°). The inner rotor ignition systems designed by Malossi are based on the state-of-the-art technology applied to racing. Such a new system resulted from the need to overcome the technical limitations imposed by conventional flywheel ignition, which cannot ensure consistent performance over 10,000 rpm and causes severe setting-up problems for racing vehicles. We made the control…
Erleichtertes Schwungrad (Masse 885 g für einen Trägheitsmoment von 16,2 kg/cm2), das heiß geformt und konzipiert wurde, um auch hohen Drehzahlen standzuhalten!
Die Verwendung des neuen O 2 Controllers ermöglicht die Steuerung der Vergasung in dem Bereich, in dem die Lambda-Sonde die Art des in den Brennraum einzuführenden Luft-Benzin- Gemisches steuert. Dieses Gerät ist in der Lage, die Lambdasonde bei einem vom stöchiometrischen Wert abweichenden Wert arbeiten zu lassen und das A/F (Luft / Kraftstoff-Verhältnis) anzureichern, um Drehmoment und Leistung zu verbessern und gleichzeitig die DNA des Motors zu respektieren. Das Hauptziel der Forschungs- und Entwicklungsabteilung von Malossi besteht darin, sicherzustellen, dass jedes Fahrzeug über eine…
Wir empfehlen den Einsatz des O2 Lambda Emulator zur Optimierung der Einspritzmenge und Leistung beim Lastwechsel. Bei den Motorrädern der neuesten Generation, dank des Lambda Emulator, ist die CDI imstande, die optimale Kraftstoffmenge zu bestimmen, um ein sehr stabiles Luft/ Kraftstoff Gemisch auch im "Closed Loop"-Bereich zu gewährleisten. Das Malossi Modul simuliert das original Signal und stimmt es zusätzlich auf ein von Malossi auf Luft/Kraftstoff Verhältnis perfekt abgestimmtes ab. So erzielt Malossi eine optimale Einspritzmenge ohne eine Fehlermeldung an die CDI zu übertragen.
Besides its improved fuel curves, efforts from Malossi’s technical staff resulted with a rev limiter increase of 1.300 RPM depending on the vehicle, making Force Master an even higher performing ECU! Force Master allows to change the injection in order to fit perfectly the Malossi 4-stroke and original cylinders. Carburation adjusting ± 20% at min/medium/max RPM limiter : + 1.300 RPM Original 9.700 - Malossi 11.000 4 different maps : curve 0 : Malossi exhaust system with db killer, original cylinder, original head, original camshaft and original filter curve 1 : original exhaust system,…
Besides its improved fuel curves, efforts from Malossi’s technical staff resulted with a rev limiter increase of 1.250 RPM depending on the vehicle, making Force Master an even higher performing ECU! Force Master allows to change the injection in order to fit perfectly the Malossi 4-stroke and original cylinders. Carburation adjusting ± 20% at min/medium/max RPM limiter : + 1.250 RPM Original 9.250 - Malossi 10.500 4 different maps : curve 0 : original exhaust system, cylinder with kit Malossi ø 63 mm 125 cc., original head, original camshaft and original filter curve 1 : Malossi exhaust…
With an all-new look, the Force Master 2.1 control unit is much easier to configure. Making products more ergonomic and easy to use has always been a Malossi goal: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication lines, a new user interface and the addition of a capacitive ignition input, Force Master 2.1 is the ideal complement for vehicle performance management: without functional limitations, it allows the engine to be pushed beyond the barrier of the original rev limiter. Technical details Carburation adjusting ±…
The Injtronic engine control unit is the natural evolution of the original Piaggio system and enhances vehicle performance. The latest generation 32 bit microprocessor and hardware designed according to the most recent automotive quality standards make up the RACING DNA of this device. Designed to be plug & play, in other words compatible with the original sensors and actuators, the control unit only needs simple throttle calibration to synchronize the engine electronic control system. The calibrations and fine-tuning allow for a definite increase in engine performance. Technical features…
The inner rotor ignition systems designed by Malossi are based on the state-of-the-art technology applied to racing. Such a new system resulted from the need to overcome the technical limitations imposed by conventional flywheel ignition, which cannot ensure consistent performance over 10,000 rpm and causes severe setting-up problems for racing vehicles. We made the control unit even more immune to interferences developing an uP STM8 - 8 bit microprocessor with processing speed of 20MIPS, guaranteeing spark timing with greater accuracy than prior versions! The MHR version includes a control…
Bei der Gestaltung von Motoren wird oft ein sekundärer Fokus auf die Zündung gelegt. Diese Komponente ist jedoch von entscheidender Bedeutung, da durch sie der genaue Moment gesteuert wird, in dem der Funken auf die Zündkerze überspringt und die Strommenge eingestellt wird, durch die die Qualität des Funken bestimmt wird, um eine optimale Verbrennung zu erzielen. Sowohl in vorbereiteten Motoren als auch in Originalmotoren kann der Ersatz der Zündung durch eine moderne und leistungsfähige Generierung ist ein Verfahren, das dem Motor ein neues Leben verleiht und eine effektive und einfache…
With an all-new look, the Force Master 2.1 control unit is much easier to configure. Making products more ergonomic and easy to use has always been a Malossi goal: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication lines, a new user interface and the addition of a capacitive ignition input, Force Master 2.1 is the ideal complement for vehicle performance management: without functional limitations, it allows the engine to be pushed beyond the barrier of the original rev limiter. Technical details Carburation adjusting ±…
Italiano
English
Français
Español
