Italiano
Français
Español
Deutsch
- -15%
- New
Availability: 3 In Stock
MALOSSI - Exhaust system power classic exhaust
3217868
€150.46
€127.89
Save 15%
Handling 4-5 days
Exhaust System for Vespa ET3 125 CC Even the Vespa ET3 125, the most classic of scooters, sometimes needs a little more oomph. On a two stroke engine, the most obvious and simple modification that can be made is by adding an exhaust system expansion chamber. Malossi technicians have therefore designed a custom exhaust system from scratch for the good old Vespa ET3, with a goal of immediately increasing performance and enjoyability without disturbing the timeless silhouette of the Piaggio scooter. It looks like the most classic Exhaust System, but all the new parts and improvements are hidden…
Attention: Universal Product
This product is indicated as universal, it may not be compatible with your motorcycle.
Please make sure before purchasing it
This product is indicated as universal, it may not be compatible with your motorcycle.
Please make sure before purchasing it
Do you shop outside the EU?
click for Info!
Specialized team
click here and write to us!
Ask for info via WhatsApp!
Click HERE
Found a lower price?
Write to us HERE
Many Secure Payment Methods, Credit Cards or PayPal
Exhaust System for Vespa ET3 125 CC
Even the Vespa ET3 125, the most classic of scooters, sometimes needs a little more oomph. On a two stroke engine, the most obvious and simple modification that can be made is by adding an exhaust system expansion chamber.
Malossi technicians have therefore designed a custom exhaust system from scratch for the good old Vespa ET3, with a goal of immediately increasing performance and enjoyability without disturbing the timeless silhouette of the Piaggio scooter.
It looks like the most classic Exhaust System, but all the new parts and improvements are hidden under the surface. To get the best out of this expansion chamber and so as to allow it to be fitted on all Vespas, the new manifold has been designed in order to be adapted to all motors available for this Vespa, from the original capacity to the top-performing models from the Malossi range.
It is the manifold, due to its shape, that best connects the exhaust gas flow from the cylinder to the exhaust system, ensuring a noticeable performance increase. The exhaust system body, with its characteristic expansion chamber shape, has been specifically designed to guarantee maximum performance to an operational all-rounder. From low to high revs the suction effect of the combusted gases generated by this component are maximised.
This component has been designed with the specific function in mind to be identical to the original, to remain as discreet as possible. Inside however, two separate chambers have been created by a divider in order to obtain the maximum suitable expansion of exhaust gases, whilst minimising noise from the exhaust system.
The Malossi Power Classic Exhaust, system, top performance and riding pleasure for your Vespa ET3 125, disguised in classic and discreet clothing.
Products reserved exclusively for racing in specifically designed locations according to the provisions of the competent sporting authorities. We disclaim all liability for improper use
Documents and videos
Vehicle compatibility (2 vehicles)
Vespa(2)
- ET3 Primavera 125 2T
- Primavera 125 2T
3217868
Data sheet
- Country of origin
- Italy
- Vehicle brand
- Vespa
- Vehicle
- Vespa ET3 Primavera 125 2T
Vespa Primavera 125 2T
16 other products in the same category:
Availability: Out of stock
Availability: 3 In Stock
SCOOTER RACING EXHAUST SYSTEM The Racing Exhaust developed on the racetrack for the racetrack. It is one of the essential components intended for MALOSSI SCOOTER 70cc trophies, studied especially to increase the power of the engine at medium and high regimes. The Malossi Scooter Trophies are raced in all the world according to precise rules that require different Special Malossi Racing products for each category. This insures an optimum and homogeneous result for the various participants while utilizing the most advanced technologies. With the SCOOTER RACING exhaust sytems Malossi expands its…
Availability: 1 In Stock
Malossi is pleased to announce the new homologated RX Black exhaust systems for maxi scooters! It's a new line of homologated exhausts, suitable for a wide range of engines (up to 400 cc). A genuine concentrate of technology, but with a very reduced weight: an RX Black exhaust weights approximately 3.5 kg only! This weight reduction may even reach 3 kg depending on its application. Internal components and DB killer were completely re-designed in order to achieve the best performance, while keeping noise levels within legal limits; vibrations are reduced with three silent-blocks, and assembly…
Availability: 3 In Stock
Homologated exhaust systems for Scooters 50 2T Gritty looking, silent, performing. Designed to complete an optimal engine thermodynamic cycle, defined at the test bench and tested on rough road paths with strong slopes. Made of mild steel sheet, internally covered with soundproofing materials, featuring a reinforced “chicane”, epoxy-coating and aluminium die-cast heat shield.
Availability: 3 In Stock
HIGH PERFORMANCE EXHAUST SYSTEM A significant re-styling for the legendary motorcycles that left its mark in history. Two new projects designed for collectors and enthusiasts of high quality machines. The already outstanding cylinder kits, known as C.V.F., and the reed valve intakes were the focal points for the evolution of this motorcycle. Within Malossi, there was a strong desire to add to them a special series of exhausts: the new TOO BAD exhaust, sport exhaust systems, re-designed for high performance, with modern and aggressive styling. Innovation and creativity is part of Malossi's…
Availability: 3 In Stock
The Racing Exhaust developed on the racetrack for the racetrack. It is one of the essential components intended for MALOSSI trophy , studied especially to increase the power of the engine at medium and high regimes. The Malossi Trophies are raced in all the world according to precise rules that require different Special Malossi Racing products for each category. This insures an optimum and homogeneous result for the various participants while utilizing the most advanced technologies. With the GP MHR exhaust sytems Malossi expands its range of trophy exhaust systems, that represents the…
Availability: 3 In Stock
HOMOLOGATED SUPERMOTO MHR REPLICA The engineers at Malossi R&D Department have improved the vehicles performance according to laws and regulations after strict testing with sophisticated and modern equipment. The SUPERMOTO MHR REPLICA exhaust systems address a sporting and demanding customer; they personalize your vehicle with elegance and with a "performance sound", completing the thermodynamic cycle of the famous Malossi MHR REPLICA cylinder kit. TECHNICAL FEATURES EXHAUST in special sheet steel (1 mm thickness) manufactured using robotic T.I.G. and M.I.G. welding of cone sections. The…
Availability: 3 In Stock
Technical Features EXHAUST in special sheet steel (1.5 mm thickness) manufactured through the press working process. The exhaust features silencing baffles, aluminum alloy mounting brackets with vibration isolators. Clear-coat finish. SILENCER in aluminum, repackable.
Availability: 1 In Stock
The engineers at Malossi R&D Department have improved the vehicles performance according to laws and regulations after strict testing with sophisticated and modern equipment. The GP MHR REPLICA exhaust systems address a sporting and demanding customer; they personalize your vehicle with elegance and with a "performance sound", completing the thermodynamic cycle of the famous Malossi MHR REPLICA cylinder kit. TECHNICAL FEATURES EXHAUST in special sheet steel (1 mm thickness), manufactured using robotic T.I.G. and M.I.G. welding of cone sections. The exhaust feature silencing baffles, aluminium…
Availability: 3 In Stock
Homologated exhaust systems for Scooters 50 2T Gritty looking, silent, performing. Designed to complete an optimal engine thermodynamic cycle, defined at the test bench and tested on rough road paths with strong slopes. Made of mild steel sheet, internally covered with soundproofing materials, featuring a reinforced “chicane”, epoxy-coating and aluminium die-cast heat shield.
Availability: 3 In Stock
HOMOLOGATED SUPERMOTO MHR REPLICA The engineers at Malossi R&D Department have improved the vehicles performance according to laws and regulations after strict testing with sophisticated and modern equipment. The SUPERMOTO MHR REPLICA exhaust systems address a sporting and demanding customer; they personalize your vehicle with elegance and with a "performance sound", completing the thermodynamic cycle of the famous Malossi MHR REPLICA cylinder kit. TECHNICAL FEATURES EXHAUST in special sheet steel (1 mm thickness) manufactured using robotic T.I.G. and M.I.G. welding of cone sections. The…
Availability: 3 In Stock
The Malossi Scooter Racing MHR exhausts have been conceived and manufactured with a single objective: to achieve the highest possible performance when paired with the 100 cc cylinder for which they were designed. All Scooter Racing exhausts are crafted from steel sheets with an exact and constant thickness of 0.8mm, laser-cut , and assembled with meticulous precision using robotic T.I.G. and M.I.G. welding along with manual oxyacetylene welding, and finally hand-hammered for optimal finish. They also feature a calibrated nozzle , engineered to strict tolerances to ensure that the pressure…