Malossi is pleased to announce the new RX Black exhaust systems for maxi scooters! It's a new line of exhausts, suitable for a wide range of engines (up to 400 cc). A genuine concentrate of technology, but with a very reduced weight: an RX Black exhaust weights approximately 3.5 kg only! This weight reduction may even reach 3 kg depending on its application. Internal components and DB killer were completely re-designed in order to achieve the best performance, while keeping noise levels within legal limits; vibrations are reduced with three silent-blocks, and assembly is extremely simple. A…

Malossi is pleased to announce the new homologated RX exhaust systems for maxi scooters! It's a new line of homologated exhausts suitable for a wide range of engines (up to 400 cc). A genuine concentrate of technology, but a very reduced weight: an RX exhaust weights approximately 3.5 kg only! This weight reduction may even reach 3 kg depending on its application. Internal components and DB killer were completely re-designed in order to achieve the best performance, but keep the noise within law limits; three silent-blocks allow to reduce vibrations, while a shaped plate and three fasteners…

This racing DB killer allows to further improve the performance of the homologated RX exhausts. Although it does not respect the European homologation standards, it keeps the noise within acceptable limits.

Homologated exhaust systems for Scooters 50 2T Gritty looking, silent, performing. Designed to complete an optimal engine thermodynamic cycle, defined at the test bench and tested on rough road paths with strong slopes. Made of mild steel sheet, internally covered with soundproofing materials, featuring a reinforced “chicane”, epoxy-coating and aluminium die-cast heat shield.

HIGH PERFORMANCE EXHAUST SYSTEM A significant re-styling for the legendary motorcycles that left its mark in history. Two new projects designed for collectors and enthusiasts of high quality machines. The already outstanding cylinder kits, known as C.V.F., and the reed valve intakes were the focal points for the evolution of this motorcycle. Within Malossi, there was a strong desire to add to them a special series of exhausts: the new TOO BAD exhaust, sport exhaust systems, re-designed for high performance, with modern and aggressive styling. Innovation and creativity is part of Malossi's…

Homologated exhaust systems for Scooters 50 2T Gritty looking, silent, performing. Designed to complete an optimal engine thermodynamic cycle, defined at the test bench and tested on rough road paths with strong slopes. Made of mild steel sheet, internally covered with soundproofing materials, featuring a reinforced “chicane”, epoxy-coating and aluminium die-cast heat shield.

Malossi is pleased to announce the new RX Black exhaust systems for maxi scooters! It's a new line of exhausts, suitable for a wide range of engines (up to 400 cc). A genuine concentrate of technology, but with a very reduced weight: an RX Black exhaust weights approximately 3.5 kg only! This weight reduction may even reach 3 kg depending on its application. Internal components and DB killer were completely re-designed in order to achieve the best performance, while keeping noise levels within legal limits; vibrations are reduced with three silent-blocks, and assembly is extremely simple. A…

Exhaust System for Vespa ET3 125 CC Even the Vespa ET3 125, the most classic of scooters, sometimes needs a little more oomph. On a two stroke engine, the most obvious and simple modification that can be made is by adding an exhaust system expansion chamber. Malossi technicians have therefore designed a custom exhaust system from scratch for the good old Vespa ET3, with a goal of immediately increasing performance and enjoyability without disturbing the timeless silhouette of the Piaggio scooter. It looks like the most classic Exhaust System, but all the new parts and improvements are hidden…

MOPED RACING MHR EXHAUST SYSTEM The Moped Racing exhaust is an essential component in the development of the vehicle and has been specifically designed to give the engine an increase in power at medium to high speeds. It has a profile that allows it to be mounted on ALL Ciao, Bravo, Si, and Grillo mopeds and is designed to be used in conjunction with ALL aluminium Racing assemblies currently on sale. Created for the most extreme processing demands, it has a stroke with minimal losses that is truly enticing and is able to highlight the sporting nature of each vehicle. The generous dimensions…

Technical Features EXHAUST in special sheet steel (1.5 mm thickness) manufactured through the press working process. The exhaust features silencing baffles, stainless steel mounting brackets with vibration isolators. Clear-coat finish. SILENCER in aluminum, repackable.

The Malossi Supermoto MHR 100 exhausts have been conceived and manufactured with a single objective: to achieve the highest possible performance when paired with the 100 cc cylinder for which they were designed. All Scooter Racing exhausts are crafted from steel sheets with an exact and constant thickness of 0.8mm, laser-cut , and assembled with meticulous precision using robotic T.I.G. and M.I.G. welding along with manual oxyacetylene welding, and finally hand-hammered for optimal finish. They also feature a calibrated nozzle , engineered to strict tolerances to ensure that the pressure…

Malossi is pleased to announce the new homologated RX Black exhaust systems for maxi scooters! It's a new line of homologated exhausts, suitable for a wide range of engines (up to 400 cc). A genuine concentrate of technology, but with a very reduced weight: an RX Black exhaust weights approximately 3.5 kg only! This weight reduction may even reach 3 kg depending on its application. Internal components and DB killer were completely re-designed in order to achieve the best performance, while keeping noise levels within legal limits; vibrations are reduced with three silent-blocks, and assembly…

Top Performer Perfection in their design, silent with increased performance, unmatched in elegance and lightweight. Maxi Wild Lion is an exclusive Malossi product- Made in Italy. Technical features Elliptical cross-section casing made of aluminium with black anodized finish and laser marked logo Carbon end caps Silencer system with the addition of sound absorbing minera lfibers, possessing high noise damping and nondegrading qualities. Equipped with DB killer Stainless steel exhaust tubes from the cylinder or to the silencer.