Totally developed on a Malossi design, completely redesigned compared to the original. The sprockets have been moved towards the direction of the axis of rotation so as to allow a consistent spring support thickness. The newly designed springs are contained by a flange screwed to the axle. Can be used with Malossi gears and/or with the original ones. Made with special case-hardened steel, ground. The shape of the gear differs from the original due to the design in the area of the flexible coupling. To obtain the retaining wall of the springs, as already written, the wheels have been moved…

Transmission gears made of special steel with straight teeth and recalculated ratio. They completely eliminate all the axial pressures, thereby reducing stress on the bearings. They are constructed using high-precision machine, casehardened, tempered and ground to provide silent running and long life.

Primary gear shaft We went as far as modifying the primary gear shaft to accommodate a pulley and clutch/bell assembly derived from the scooter world. Having become the connecting element between the newly designed components, this shaft has been reinforced with an increase in the shaft Ø to 13.5 and is supplied with a nut, oil seal and roller shell for mounting. Attention: in order to fit the primary gear shaft included in the kit, it is necessary to have fitted Malossi primary gears art. ( 6718630 out of prod.) or 6719286 or 67 7021 .

Primary gears HTQ Malossi S.p.A. is pleased to offer its new series of final transmission gears. These new gears were created by exploiting our 20-year experience in designing and building gears. The new HTQ gears were designed and built with straight/helical teeth to minimise losses through friction and stress on the supports. Moreover, our gears increase ratios slightly enabling you to exploit the full power of your vehicle, thus significantly increasing its original performance potential.

Primary gears HTQ Malossi S.p.A. is pleased to offer its new series of final transmission gears. These new gears were created by exploiting our 20-year experience in designing and building gears. The new HTQ gears were designed and built with straight/helical teeth to minimise losses through friction and stress on the supports. Moreover, our gears increase ratios slightly enabling you to exploit the full power of your vehicle, thus significantly increasing its original performance potential.

Gear selector stem made of hardened and tempered steel with nickel-plating treatment to increase sliding as well as giving it an aesthetic touch by increasing its brightness. Ø 20 mm length 88.4 mm

Malossi is pleased to announce a new rear wheel axle, completing the set of primary and secondary gears! This rear wheel axle is a result of Malossi's twenty years of experience in gear designing and production for road and racing scooters. The rear wheel axle was designed and manufactured to be assembled into the original gear box without any modifications. The Malossi engineers have worked to reduce the rotating masses, hollow the wheel axle and increase rigidity and strength of the axle. Ideal match: MHR gear box cover, exaggerated performance! Technical Specifications Material: special…

VESPA SMALL FRAME GEAR CLUSTER AND GEARWHEEL KIT Although it shares several elements with the motorcycle world, such as the gears, the Vespa can be considered the forefather of the scooter, yet it poses a number of challenges. Lacking a conventional front and rear sprocket, the Vespa does not allow for the variation of its wheelbase. This makes it complicated to carry out any necessary modifications to support every performance increase – with the correct final drive ratio. Initially, at Malossi, we sought a solution by creating a new gear kit that coupled with the stock components ( art.…

Primary gears HTQ Malossi S.p.A. is pleased to offer its new series of final transmission gears. These new gears were created by exploiting our 20-year experience in designing and building gears. The new HTQ gears were designed and built with straight/helical teeth to minimise losses through friction and stress on the supports. Moreover, our gears increase ratios slightly enabling you to exploit the full power of your vehicle, thus significantly increasing its original performance potential.

Primary gears HTQ Malossi S.p.A. is pleased to offer its new series of final transmission gears. These new gears were created by exploiting our 20-year experience in designing and building gears. The new HTQ gears were designed and built with straight/helical teeth to minimise losses through friction and stress on the supports. Moreover, our gears increase ratios slightly enabling you to exploit the full power of your vehicle, thus significantly increasing its original performance potential.