Italiano
Français
Español
Deutsch
- -15%
- New
Availability: 3 In Stock
Main shaft pin: built in case-hardened steel then ground in the bearing housings length 121 mm Ø bearing 15 mm Ø bush 13 mm Ø wheel side 15 mm
MALOSSI - PRIMARY GEARS HTQ z 15/41
67 7014
€96.92
€82.38
Save 15%
Handling 4-5 days
Primary gears HTQ Malossi S.p.A. is pleased to offer its new series of final transmission gears. These new gears were created by exploiting our 20-year experience in designing and building gears. The new HTQ gears were designed and built with straight/helical teeth to minimise losses through friction and stress on the supports. Moreover, our gears increase ratios slightly enabling you to exploit the full power of your vehicle, thus significantly increasing its original performance potential.
Attention: Universal Product
This product is indicated as universal, it may not be compatible with your motorcycle.
Please make sure before purchasing it
This product is indicated as universal, it may not be compatible with your motorcycle.
Please make sure before purchasing it
Do you shop outside the EU?
click for Info!
Specialized team
click here and write to us!
Ask for info via WhatsApp!
Click HERE
Found a lower price?
Write to us HERE
Many Secure Payment Methods, Credit Cards or PayPal
Primary gears HTQ
Malossi S.p.A. is pleased to offer its new series of final transmission gears.
These new gears were created by exploiting our 20-year experience in designing and building gears. The new HTQ gears were designed and built with straight/helical teeth to minimise losses through friction and stress on the supports. Moreover, our gears increase ratios slightly enabling you to exploit the full power of your vehicle, thus significantly increasing its original performance potential.
Products reserved exclusively for racing in specifically designed locations according to the provisions of the competent sporting authorities. We disclaim all liability for improper use
Vehicle compatibility (17 vehicles)
Aprilia(2)
- SONIC 50 2T
- SONIC 50 2T LC
BSV(2)
- AX 50
- GZ 50
DRR(2)
- DRX 90 2T LC 2016→
- DRX 90 2T LC ←2015
Keeway(2)
- HURRICANE 50 2T euro 2 (KW1E40QMB)
- PIXEL 50 2T euro 2 (KW1E40QMB )
Laverda(1)
- QUASAR 50 2T (AR 03)
MBK(3)
- EVOLIS 50 2T
- FIZZ 50 2T
- FORTE 50 2T
Malaguti(3)
- F10 50 2T
- F10 WAP 50 2T euro 2 (QJ*CMA03C*)
- YESTERDAY 50 2T
Yamaha(2)
- BREEZE 50 2T
- ZEST 50 2T
67 7014
Data sheet
- Country of origin
- Italy
- Vehicle brand
- Aprilia
BSV
DRR
Keeway
Laverda
MBK
Malaguti
Yamaha - Vehicle
- Aprilia SONIC 50 2T
Aprilia SONIC 50 2T LC
BSV AX 50
BSV GZ 50
DRR DRX 90 2T LC 2016→
DRR DRX 90 2T LC ←2015
Keeway HURRICANE 50 2T euro 2 (KW1E40QMB)
Keeway PIXEL 50 2T euro 2 (KW1E40QMB )
Laverda QUASAR 50 2T (AR 03)
MBK EVOLIS 50 2T
MBK FIZZ 50 2T
MBK FORTE 50 2T
Malaguti F10 50 2T
Malaguti F10 WAP 50 2T euro 2 (QJ*CMA03C*)
Malaguti YESTERDAY 50 2T
Yamaha BREEZE 50 2T
Yamaha ZEST 50 2T
16 other products in the same category:
Availability: 1 In Stock
Availability: 3 In Stock
Primary gears HTQ Malossi S.p.A. is pleased to offer its new series of final transmission gears. These new gears were created by exploiting our 20-year experience in designing and building gears. The new HTQ gears were designed and built with straight/helical teeth to minimise losses through friction and stress on the supports. Moreover, our gears increase ratios slightly enabling you to exploit the full power of your vehicle, thus significantly increasing its original performance potential.
Availability: 3 In Stock
Primary gears HTQ Malossi S.p.A. is pleased to offer its new series of final transmission gears. These new gears were created by exploiting our 20-year experience in designing and building gears. The new HTQ gears were designed and built with straight/helical teeth to minimise losses through friction and stress on the supports. Moreover, our gears increase ratios slightly enabling you to exploit the full power of your vehicle, thus significantly increasing its original performance potential.
Availability: 3 In Stock
Malossi Super T Max quickens its steps. Mhr Power Transmission, art. 6714757, is a Malossi project: HTQ Z 26/40 pinion and ring gear pair with lengthened gear ratio, Malossi Morse lightened, narrower, frictionless racing chain. This system completely replaces the original primary gears (25-tooth pinion and 41-tooth ring gear) with a 26-tooth drive pinion and a 40-tooth driven ring gear, thus providing a 7% longer ratio. Besides providing this longer ratio, these gears are narrower, as to fit the new Malossi Morse racing chain, which is frictionless and without friction springs, thus lighter,…
Availability: 1 In Stock
Ruote eseguite con acciaio speciale da cementazione, le ruote sono ottenute con macchine dentatrici al CNC e le ruote sono rettificate nelle superfici di contatto. Nelle superfici di contatto tra gli ingranaggi abbiamo ottenuto delle piccole sacche utili al trasporto dell’olio per aumentarne e garantire la lubrificazione tra le pareti che scorrono tra loro. I numeri di denti sono stati calcolati per dare un rapporto di trasmissione ottimizzato. In tutte le ruote dove era possibile eseguirli sono stati praticati dei fori di alleggerimento tranne che nella zona di sezione di contatto tra ruota…
Availability: 3 In Stock
Transmission gears made of special steel with straight teeth and recalculated ratio. They completely eliminate all the axial pressures, thereby reducing stress on the bearings. They are constructed using high-precision machine, casehardened, tempered and ground to provide silent running and long life.
Availability: 3 In Stock
Ruote eseguite con acciaio speciale da cementazione, le ruote sono ottenute con macchine dentatrici al CNC e le ruote sono rettificate nelle superfici di contatto. Nelle superfici di contatto tra gli ingranaggi abbiamo ottenuto delle piccole sacche utili al trasporto dell’olio per aumentarne e garantire la lubrificazione tra le pareti che scorrono tra loro. I numeri di denti sono stati calcolati per dare un rapporto di trasmissione ottimizzato. In tutte le ruote dove era possibile eseguirli sono stati praticati dei fori di alleggerimento tranne che nella zona di sezione di contatto tra ruota…
Availability: 3 In Stock
Availability: 3 In Stock
Ruote eseguite con acciaio speciale da cementazione, le ruote sono ottenute con macchine dentatrici al CNC e le ruote sono rettificate nelle superfici di contatto. Nelle superfici di contatto tra gli ingranaggi abbiamo ottenuto delle piccole sacche utili al trasporto dell’olio per aumentarne e garantire la lubrificazione tra le pareti che scorrono tra loro. I numeri di denti sono stati calcolati per dare un rapporto di trasmissione ottimizzato. In tutte le ruote dove era possibile eseguirli sono stati praticati dei fori di alleggerimento tranne che nella zona di sezione di contatto tra ruota…
Availability: 3 In Stock
Primary gears HTQ Malossi S.p.A. is pleased to offer its new series of final transmission gears. These new gears were created by exploiting our 20-year experience in designing and building gears. The new HTQ gears were designed and built with straight/helical teeth to minimise losses through friction and stress on the supports. Moreover, our gears increase ratios slightly enabling you to exploit the full power of your vehicle, thus significantly increasing its original performance potential.
Availability: 3 In Stock
Malossi is pleased to announce a new rear wheel axle, completing the set of primary and secondary gears! This rear wheel axle is a result of Malossi's twenty years of experience in gear designing and production for road and racing scooters. The rear wheel axle was designed and manufactured to be assembled into the original gear box without any modifications. The Malossi engineers have worked to reduce the rotating masses, hollow the wheel axle and increase rigidity and strength of the axle. Ideal match: MHR gear box cover, exaggerated performance! Technical Specifications Material: special…