Gears for Piaggio Mopeds with variator Malossi S.p.A. is pleased to offer its series of final transmission gears for mopeds. The HTQ gears were designed and built with straight teeth to minimise losses through friction and stress on the supports. Moreover, our gears increase ratios slightly enabling you to exploit the full power of your vehicle, thus significantly increasing its original performance potential. ATTENTION: The shaft does not allow to use the vehicle in “bicycle” mode.

Primary gears HTQ Malossi S.p.A. is pleased to offer its new series of final transmission gears. These new gears were created by exploiting our 20-year experience in designing and building gears. The new HTQ gears were designed and built with straight/helical teeth to minimise losses through friction and stress on the supports. Moreover, our gears increase ratios slightly enabling you to exploit the full power of your vehicle, thus significantly increasing its original performance potential.

Totally developed on a Malossi design, completely redesigned compared to the original. The sprockets have been moved towards the direction of the axis of rotation so as to allow a consistent spring support thickness. The newly designed springs are contained by a flange screwed to the axle. Can be used with Malossi gears and/or with the original ones. Made with special case-hardened steel, ground. The shape of the gear differs from the original due to the design in the area of the flexible coupling. To obtain the retaining wall of the springs, as already written, the wheels have been moved…

Primary gears HTQ Malossi S.p.A. is pleased to offer its new series of final transmission gears. These new gears were created by exploiting our 20-year experience in designing and building gears. The new HTQ gears were designed and built with straight/helical teeth to minimise losses through friction and stress on the supports. Moreover, our gears increase ratios slightly enabling you to exploit the full power of your vehicle, thus significantly increasing its original performance potential.

Transmission gears made of special steel with straight teeth and recalculated ratio. They completely eliminate all the axial pressures, thereby reducing stress on the bearings. They are constructed using high-precision machine, casehardened, tempered and ground to provide silent running and long life.

Gear selector stem made of hardened and tempered steel with nickel-plating treatment to increase sliding as well as giving it an aesthetic touch by increasing its brightness. Ø 20 mm length 88.4 mm

Primary gears HTQ Malossi S.p.A. is pleased to offer its new series of final transmission gears. These new gears were created by exploiting our 20-year experience in designing and building gears. The new HTQ gears were designed and built with straight/helical teeth to minimise losses through friction and stress on the supports. Moreover, our gears increase ratios slightly enabling you to exploit the full power of your vehicle, thus significantly increasing its original performance potential.

Malossi is pleased to offer their customers its new final transmission gear assembly... THIRD SUPPORT Malossi, always attentive to rider's observations and requests, has focused on Minarelli-Yamaha, considering the CVT system has shown some deficiencies. At high RPMs, the driven pulley generates strong vibrations and oscillations to the primary gear shaft. To remedy this problem, an additional bearing, inserted into the original crankcase cover is used creating a third support for a redesigned longergear shaft. This modification prevents the gear shaft from flexing thus allowing the CVT…

Malossi is pleased to announce a new rear wheel axle, completing the set of primary and secondary gears! This rear wheel axle is a result of Malossi's twenty years of experience in gear designing and production for road and racing scooters. The rear wheel axle was designed and manufactured to be assembled into the original gear box without any modifications. The Malossi engineers have worked to reduce the rotating masses, hollow the wheel axle and increase rigidity and strength of the axle. Ideal match: MHR gear box cover, exaggerated performance! Technical Specifications Material: special…

Primary gears HTQ Malossi S.p.A. is pleased to offer its new series of final transmission gears. These new gears were created by exploiting our 20-year experience in designing and building gears. The new HTQ gears were designed and built with straight/helical teeth to minimise losses through friction and stress on the supports. Moreover, our gears increase ratios slightly enabling you to exploit the full power of your vehicle, thus significantly increasing its original performance potential.

Gears for Piaggio Mopeds with variator Malossi S.p.A. is pleased to offer its series of final transmission gears for mopeds. The HTQ gears were designed and built with straight teeth to minimise losses through friction and stress on the supports. Moreover, our gears increase ratios slightly enabling you to exploit the full power of your vehicle, thus significantly increasing its original performance potential.