Italiano
Français
Español
Deutsch
- -15%
- New
MALOSSI - AIR FORCE cover/bolts for Yamaha and Minarelli horizontal engine case
5719367
€181.79
€154.52
Save 15%
Handling 4-5 days
The Malossi engine crankcase range is enriched with a new and precious jewel: Air Force, the new transmission crankcase cover compatible with horizontal Yamaha Minarelli engines. It is called Air Force because its strength is, at the same time, to allow the introduction of a greater mass of air, conveying it precisely on the transmission components, and to increase the capacity for extracting hot air. The resulting advantage is a significant reduction in the temperature of the Over Range compartment and, consequently, greater stability and duration of the transmission. Made by die-casting,…
Attention: Universal Product
This product is indicated as universal, it may not be compatible with your motorcycle.
Please make sure before purchasing it
This product is indicated as universal, it may not be compatible with your motorcycle.
Please make sure before purchasing it
Do you shop outside the EU?
click for Info!
Specialized team
click here and write to us!
Ask for info via WhatsApp!
Click HERE
Found a lower price?
Write to us HERE
Many Secure Payment Methods, Credit Cards or PayPal
The Malossi engine crankcase range is enriched with a new and precious jewel: Air Force, the new transmission crankcase cover compatible with horizontal Yamaha Minarelli engines.
It is called Air Force because its strength is, at the same time, to allow the introduction of a greater mass of air, conveying it precisely on the transmission components, and to increase the capacity for extracting hot air.
The resulting advantage is a significant reduction in the temperature of the Over Range compartment and, consequently, greater stability and duration of the transmission. Made by die-casting, Air Force, with its structure, greatly increases the mechanical resistance of the whole assembly, perfecting a precise and dynamic driving feeling.
Its internal shape finally makes it possible to obtain all the space necessary for the clutch bell in the rear area, significantly increasing the volume available for the transmission and, at the same time, considerably reducing the lateral dimensions compared to the standard transmission casing.
The Air Force is designed to be paired with the primary gear kit with third support, art. 6714733.
Products reserved exclusively for racing in specifically designed locations according to the provisions of the competent sporting authorities. We disclaim all liability for improper use
Documents and videos
Vehicle compatibility (25 vehicles)
Aprilia(8)
- AREA 51 50 2T LC
- GULLIVER 50 2T LC
- RALLY 50 2T LC (MINARELLI)
- SONIC 50 2T LC
- SR NETSCAPER 50 2T LC (MINARELLI)
- SR RACING 50 2T LC (MINARELLI)
- SR REPLICA 50 2T LC ←1999
- SR STEALTH 50 2T LC (MINARELLI)
Benelli(2)
- 491 SPORT 50 2T LC (MINARELLI)
- K2 50 2T LC
Beta(2)
- ARK 50 2T LC
- EIKON 50 2T LC
Garelli(1)
- GSP 50 2T LC euro 2 (1PE40MB)
Italjet(1)
- DRAGSTER 50 2T LC
MBK(2)
- MACH G 50 2T LC
- NITRO 50 2T LC
Malaguti(5)
- F12 DIGIT KAT-PHANTOM 50 2T LC
- F12 DIGIT KAT-PHANTOM 50 2T LC euro 2
- F12 R LC 50 2T LC euro 2
- F12-PHANTOM 50 2T LC
- F15 FIREFOX 50 2T LC
Over(1)
- THOR 50 2T LC 2013→ (LJ1PE40MB)
Yamaha(3)
- AEROX 50 2T LC euro 0-1
- AEROX 50 2T LC euro 2
- JOGRR 50 2T LC euro 2
5719367
Data sheet
- Country of origin
- Italy
- Vehicle brand
- Aprilia
Benelli
Beta
Garelli
Italjet
MBK
Malaguti
Over
Yamaha - Vehicle
- Aprilia AREA 51 50 2T LC
Aprilia GULLIVER 50 2T LC
Aprilia RALLY 50 2T LC (MINARELLI)
Aprilia SONIC 50 2T LC
Aprilia SR NETSCAPER 50 2T LC (MINARELLI)
Aprilia SR RACING 50 2T LC (MINARELLI)
Aprilia SR REPLICA 50 2T LC ←1999
Aprilia SR STEALTH 50 2T LC (MINARELLI)
Benelli 491 SPORT 50 2T LC (MINARELLI)
Benelli K2 50 2T LC
Beta ARK 50 2T LC
Beta EIKON 50 2T LC
Garelli GSP 50 2T LC euro 2 (1PE40MB)
Italjet DRAGSTER 50 2T LC
MBK MACH G 50 2T LC
MBK NITRO 50 2T LC
Malaguti F12 DIGIT KAT-PHANTOM 50 2T LC
Malaguti F12 DIGIT KAT-PHANTOM 50 2T LC euro 2
Malaguti F12 R LC 50 2T LC euro 2
Malaguti F12-PHANTOM 50 2T LC
Malaguti F15 FIREFOX 50 2T LC
Over THOR 50 2T LC 2013→ (LJ1PE40MB)
Yamaha AEROX 50 2T LC euro 0-1
Yamaha AEROX 50 2T LC euro 2
Yamaha JOGRR 50 2T LC euro 2
Components and spare parts
16 other products in the same category:
Availability: 3 In Stock
AIR FORCE Engine Crankcase The range of Malossi engine crankcases now welcomes a new and precious addition: Air Force , the new engine crankcase compatible with C-One, RC-One and the original Piaggio extended crankcase. It's called Air Force because its strength lies in the ability of simultaneously allowing entry of a greater mass of air, channelling it precisely on the transmission components and increasing the engine’s capacity for hot-air extraction. The advantage that comes with this combined ability is a significant reduction in the temperature of the Over Range compartment and…
Availability: 3 In Stock
MP-ONE CARTER Pressure die-cast, shot-blasted crankcase in aluminium-silicon alloy. Complete Malossi project with lamellar intake, controlled by a reed valve with four petals. Available in 2 versions which include the entire range of Piaggio and Gilera motorbikes: electronic ignition magneto ignition They can be used with any cylinder kit, exhaust system, crankshaft and fuel system. Malossi lamellar crankcases are fully compatible with the original ones and are fitted with a special inlet manifold for the original carburettor or a SHA 13/13 carburettor. A specific fuel system has been…
Availability: 3 In Stock
Coppia di carter motore rinforzati con fissaggio al quadro integrato e aspirazione attraverso valvola a grande portata. Nuovo design estremamente elegante, di grandi dimensioni, compatto, con struttura leggera e solida. Ottenuto per fusione in pressione in lega speciale di alluminio ad alta resistenza meccanica e lavorazione su macchine utensili a controllo numerico ad elevata precisione. Con questo progetto Malossi ha previsto una coppia di carter veramente universale, perfettamente intercambiabili a quelli originali, che vi offre due possibilità: ottenere un motore con eccellenti…
Availability: 3 In Stock
VR-One REED VALVE The VR-One is for power purists, for those seeking to push their Vespa to the limit, but not only this. It has the same assembly characteristics in the body as the V-One and the same possibilities of cylinder housing thanks to the revised fluid dynamics of the crank chamber, to the drilling of the studs and to the same accessories supplied with the V-One (except for the mixer pin). This crankcase has been designed to withstand higher powers and is therefore supplied with main ball bearings on the flywheel side Ø25xØ52x15 and on the drive side Ø25xØ62x12, which remove the…
Availability: 3 In Stock
VR-One REED VALVE The VR-One is for power purists, for those seeking to push their Vespa to the limit, but not only this. It has the same assembly characteristics in the body as the V-One and the same possibilities of cylinder housing thanks to the revised fluid dynamics of the crank chamber, to the drilling of the studs and to the same accessories supplied with the V-One (except for the mixer pin). This crankcase has been designed to withstand higher powers and is therefore supplied with main ball bearings on the flywheel side Ø25xØ52x15 and on the drive side Ø25xØ62x12, which remove the…
Availability: 3 In Stock
MP-ONE CARTER Pressure die-cast, shot-blasted crankcase in aluminium-silicon alloy. Complete Malossi project with lamellar intake, controlled by a reed valve with four petals. Available in 2 versions which include the entire range of Piaggio and Gilera motorbikes: electronic ignition magneto ignition They can be used with any cylinder kit, exhaust system, crankshaft and fuel system. Malossi lamellar crankcases are fully compatible with the original ones and are fitted with a special inlet manifold for the original carburettor or a SHA 13/13 carburettor. A specific fuel system has been…
Availability: 3 In Stock
Crankcase for all scooters that fit a Piaggio 2T 50cc LC engine as original equipment MHR C-ONE was conceived and designed to: Fit both drum brake and disc brake. Replace the original engine both with short and long wheelbase. The position of the shock absorber fixing has been designed to satisfy both options. Install both cylinders with stud bolts and cylinders with flange fixing. Use an electric cooling pump to eliminate the power consumption of the traditional mechanical water pump. Eliminate the automatic mixer. Install the vacuum fuel pump. Install the new bigger reed valve, designed…
Availability: 3 In Stock
V-One ROTATING VALVE The V-One has been designed for anyone seeking a crankcase that is perfectly replaceable with the original one, supplied with all the components necessary for assembly (see above), and which enables maximum interchangeability with the components on the market. The V-One is suitable to be used both for a complete restoration, as it does not require any modification of the vehicle and can be adapted to all original Piaggio parts, and for a simple “refresh” to give a hint of flamboyance to the engine involving moderate reworking, such as that offered by our Ø68.5 thermal…
Availability: 3 In Stock
AIR FORCE Engine Crankcase The range of Malossi engine crankcases now welcomes a new and precious addition: Air Force , the new engine crankcase compatible with C-One, RC-One and the original Piaggio extended crankcase. It's called Air Force because its strength lies in the ability of simultaneously allowing entry of a greater mass of air, channelling it precisely on the transmission components and increasing the engine’s capacity for hot-air extraction. The advantage that comes with this combined ability is a significant reduction in the temperature of the Over Range compartment and…
Availability: 3 In Stock
V-One ROTATING VALVE The V-One has been designed for anyone seeking a crankcase that is perfectly replaceable with the original one, supplied with all the components necessary for assembly (see above), and which enables maximum interchangeability with the components on the market. The V-One is suitable to be used both for a complete restoration, as it does not require any modification of the vehicle and can be adapted to all original Piaggio parts, and for a simple “refresh” to give a hint of flamboyance to the engine involving moderate reworking, such as that offered by our Ø63 thermal…
Availability: 3 In Stock
Crankcase for all scooters that fit a Yamaha Minarelli LC 50 cc engine as original equipment Malossi has achieved the impossible, uniting the world of racing motors for scooters thanks to the RC-One Yamaha-Minarelli. Our technicians have designed the RC-One Yamaha-Minarelli as a platform for bringing together the technical solutions as well as the internal external dimensions with all RCOne Malossi models. The Malossi RC-One housings have been designed to be used only with 94cc Flanged Mount heating units with external studs. The generous pump housing dimensions are finally adequate enough…